Spa heat is currently limited due to pool temps. All other features are functional.

When the spa is not in use, water is circulated through all bodies of water.

When pressing a spa option (60m or 90m).  Wait 60 seconds and water will be directed to the spa only and the heater will begin to come on.

The spa will be on a countdown timer for the amount of time you selected.

Allow 10-15 minutes for the spa to get to peak temperature, it may take a bit longer in colder months and less time in warmer months.

Once the spa has reached temperature, the thermostat will cycle the heater on and off to maintain target temperature.  You may feel fluctuations in the jet temperature. 

Press the blower button to toggle bubbles on and off.  This does not impact the heat. 

At the end of the 60 or 90 minute timer, the pump will begin circulating water with the entire pool again.

Please wait several minutes before pressing the spa button again after the timer ends to avoid the system locking out.

If you've purchased heat for the entire pool, please note that while running the spa, all heat is directed to the spa only.  Pool heat will resume when spa cycles off.